For optimal performance, please use these care procedures to keep the following items regularly cleaned.
Front caster wheels that are clogged with hair and debris could result in floor damage. Use the following procedure to maintain the front caster wheel.
- Pull firmly on the front wheel to remove it.
- Remove any debris from inside wheel cavity.
- Spin the wheel by hand. If rotation is restricted, remove wheel from its housing and push firmly to remove the axle and clear any debris or hair wrapped around it.
- Reinstall all parts when finished. Make sure the wheel clicks back into place.
- Use a coin or small screwdriver to remove the screw.
- Remove brush, clean the brush and brush post, and reinstall brush.
Wipe the cliff sensors with a clean, dry cloth.
Clean the charging contacts by wiping the charging contacts on the Home Base and robot with a clean, dry cloth.
Charging contacts on the Home Base.
Charging contacts on the robot.
-
Open the cleaning head module door by pushing on the gray tab on the right side of the multi-surface brushes.
-
Match the shape of the multi-surface brushes pegs with the shape on the cleaning head module.
For optimal performance, the cleaning head module should be regularly cleaned. Use the following procedure to maintain these items.
-
Open the cleaning head module door by pushing on the gray tab on the right side of the multi-surface brushes.
-
Remove the brushes from the robot and ensure hair and debris is removed from the square and hex pegs of the multi-surface brushes.
-
Clear debris on and under the gray bearings.
-
Insert the bearings on the multi-surface brushes.
-
Ensure the vacuum path is clear.
-
Match the shape of the multi-surface brushes pegs with the shape on the cleaning head module.
